New Diagnostic Tool ELM327 V1.5 Bluetooth OBD2 II Auto Car Scanner Code Reader

  • $38.85
    Unit price per 
Tax included. Shipping calculated at checkout.


Description:

  • ELM327 is the latest PC-based scan tool. It is dispatched with a number of compatible programs. The processor is an ELM327.
  • Processor: ELM327
  • OBD-II Software for ELM327 is a free program that allows you to use your PC and a hardware interface to get the information from your car's computer.
  • The program is very easy to install: Simply extract the files into a folder on your computer's hard drive, and you're ready to go To uninstall the program, simply delete the entire contents of the folder where the program resides.

Top 6 Reason To Get ELM327

Software Version: V2.1

Hardware version: V1.5

Driver IC: 340 OR 2303

It supports all OBD-II protocols

User-friendly, and easy to learn

Support two platforms - DOS and Windows.

ELM327 Functions:

Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).

Clear trouble codes and turn off the MIL ("Check Engine" light)

Display current sensor data, including:

Engine RPM; Calculated Load Value; Coolant Temperature; Fuel System Status; Vehicle Speed; Short Term Fuel Trim; Long Term Fuel Trim; Intake Manifold Pressure; Timing Advance; Intake Air Temperature; Air Flow Rate; Absolute Throttle Position; Oxygen sensor voltages / associated short term fuel trims; Fuel System status; Fuel Pressure; Many others ..

Upcoming Function: Data graphing and logging; Freeze Frame data; Continuous and Non-Continuous Oxygen Sensor test results

Support OBDII Protocols:

SAE J1850 PWM (41.6 kbaud)

SAE J1850 VPW (10.4 kbaud)

ISO 9141-2 (5 baud init, 10.4 kbaud)

ISO 14230-4 KWP (5 baud init, 10.4 kbaud)

ISO 14230-4 KWP (fast init, 10.4 kbaud)

ISO 15765-4 CAN (11 bit ID, 500 kbaud)

ISO 15765-4 CAN (29 bit ID, 500 kbaud)

ISO 15765-4 CAN (11 bit ID, 250 kbaud)

ISO 15765-4 CAN (29 bit ID, 250 kbaud)

Output Protocol: RS232

Baud rate: 9600 or 38400

Indicator LEDs: OBD Tx / Rx, RS232 Tx / Rx, Power

Operating voltage: 12V, internal protection from short circuits / overvoltages

Nominal idle current: 45 mA

ELM 327 Bluetooth V2.1 Interface Work On Android Torque Elm327 Bluetooth OBD2/OBD II Car Diagnostic-tool

There are several colors elm327 v2.1 bluetooth, pls carefully check it .thanks

ELM327 Will work with 12 V gasoline and diesel vehicles .

 Not support 24 v diesel /trucks .regards.

Compatible with 12V 16 Pin vehicles Requires OBD II protocols.

Support System

Bluetooth version    -----supports android phone/PC----connect via bluetooth

Attention:

This elm327 usually can work on most new car with OBD 16pin Aadapter and 12V engine:

For USA Car brand,after 1996;

For Europe Car brand,after 2000;

For Japan/Korea Car brand,after 2002;

For Chinese Car brand,after 2005;

Fit for Chrysler ,Fit for Ford ,Fit for GM ,Fit for Jeep:

Fit for Alfa Romeo, Fit for SAAB, Fit for Acura, Fit for Opel, Fit for Audi, Fit for Seat, Fit for Peugeot ,Fit for Renault, Fit for Bentley ,Fit for Skoda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu, Fit for Land Rover, Fit for BMW ,Fit for Vauxhall ,Fit for Citroen, Fit for Volvo ,Fit for Fiat ,Fit for VW ,Fit for Ford ,Fit for Jaguar;

Fit for KIA , Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai  ,Fit for Dacia  ,Fit for Lexus ,Fit for Mazda, Fit for Nissan, Fit for Subaru , Fit for Suzuki, Fit for Toyota;

*For Lada/ VAZ/ UAZ car makes, please don't purchase If your car is before 2011.

*For Ssangyong car makes, please don't purchase If your car is before 2008.

*For Renault Dacia Logan car model, please don't purchase If your car is before 2009.

The newly developed high-quality wireless scan tool, support OBD2 protocols.

Work with all OBD2 compliant vehicles.

Enable to read diagnostic trouble codes.

Small bluetooth interface with a 16 pin socket.

Support different kinds of devices to use this scan tool: Android system phones, Symbian system phones, Windows XP and WIN7 32bite computers.

With a switch to turn on/ off these indicator lights.

OBD-II Protocols:

  • SAE J1850 PWM(41.6Kbaud) (not support)
  • SAE J1850 VPW(10.4Kbaud) (not support)
  • ISO9141-2(5 baud init,10.4Kbaud)
  • ISO14230-4 KWP(5 baud init,10.4 Kbaud)
  • ISO14230-4 KWP(fast init,10.4 Kbaud)
  • ISO15765-4 CAN(11bit ID,500 Kbaud)
  • ISO15765-4 CAN(29bit ID,500 Kbaud)
  • ISO15765-4 CAN(11bit ID,250 Kbaud)
  • ISO15765-4 CAN(29bit ID,250 Kbaud)

A.SAE J1939 CAN(29bit ID,250*Kbaud)

B.USER1 CAN(11*bit ID,125*Kbaud)

C.USER2 CAN(11*bit ID,50*kbaud)

*default settings(user adjustable)

 Functions:

Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).

Display current sensor data, including:

  • Engine RPM
  • Calculated Load Value
  • Coolant Temperature
  • Fuel System Status
  • Vehicle Speed
  • Short Term Fuel Trim
  • Long Term Fuel Trim
  • Intake Manifold Pressure
  • Timing Advance
  • Intake Air Temperature
  • Air Flow Rate
  • Absolute Throttle Position
  • Oxygen sensor voltages/associated short term fuel trims
  • Fuel System status
  • Fuel Pressure

Package Includes:

1 * ELM327 OBD2 bluetooth diagnostic interface

1 * CD-ROM